Artem Komarov clarified that abrasive waterjets can cut steel more than 1 ft. thick. Garnet abrasive is widely used to cut not only metals but
Метка: Комаров Артём Андреевич
Комаров Артем об увеличении производительности сверхмощных волоконных лазеров (Eng)
Artem Komarov noted that mixing nitrogen and oxygen gives laser cutting a boost for sheet metal fabricators. Just a decade ago, fiber laser cutting machines
Комаров Артём об устранении неполадок плазменного резака (eng)
Artem Komarov noted that the adage “Measure twice, cut once” is as important for plasma cutters as it is for carpenters. In the plasma industry,
Комаров Артём о сварке алюминия (eng)
I’m delighted with aluminum. This may seem strange to some, but in my opinion more people should be interested in this. After all, it is
Комаров Артём о выборе расходных материалов для плазменной резки (eng)
If you open the owner’s manual, you’ll find hundreds of pages of safety, power and burner specifications, power requirements, parts lists, and troubleshooting tips. In
Комаров Артём о важных моментах в сварочных цехах (eng)
Creating a safe working environment is not limited to simply cleaning the air. This also includes constantly evaluating the types of dust and smoke you
Комаров Артём о розжиге дуги (eng)
What do welders need to know before striking the arc? Artem Komarov noted that two fundamental principles of aluminum welding: knowing the role of oxygen
Артем Комаров об исключении операции постобработки и улучшениях при подготовке к сварке
Artem Komarov explained that to prepare a material edge for welding, fabricators often make bevel cuts on the sheet metal. Beveled edges increase the weld
Комаров Артём о технологических достижениях в многопроцессных сварочных аппаратах
Artem Komarov clarified that a multiprocess welding machine prove to be beneficial to an operation that primarily uses one welding process. The answer is yes,
Комаров Артём о пористости сварного шва (eng)
Numerous attempts to correct porosity end up worsening the situation, not just leaving it unattended. Usually, complete removal is required, but this can be both