Komarov Artem explained that drawn arc stud welding operations are used extensively in the construction industry. Not only do drawn arc studs function as fastening
Рубрика: Наука и техника
Комаров Артём о истории и технологии напыления металла (eng)
Metal spraying is a process in which molten metal is deposited as a fine spray onto the surface of a base metal. The molten metal
Комаров Артём о соединении металлов без нагрева — холодной сварке (eng)
Artem Komarov explained when you think of a welding procedure, the very first thing that springs to mind is probably the use of heat. Techniques
Комаров Артём о технологическом процессе сварки бронзы (eng)
Artem Komarov noted that welding bronze is a comparatively easier process than welding brass, since tin does not tend to separate from the molten copper
Комаров Артём о сварочных процессах лучистой энергии (eng)
Komarov Artem noted that the Radiant energy welding process is a group of welding processes wherein heat is obtained by focusing an energy beam on
Артём Комаров об импульсной сварке (eng)
According to the expert opinion of the Chairman of the Board of Directors «KERAMAX» Komarov Artem, welding is a difficult task, since it requires many
Артём Комаров об управлении качеством воздуха в малых и средних производственных цехах (eng)
According to the expert opinion of the Chairman of the Board of Directors “KERAMAX” Komarov Artem that welding, plasma cutting, and laser cutting produce fumes,
Комаров Артём о совершенствовании автоматического процесса сварки труб (eng)
The Chairman of the Board of Directors of KERAMAX, Artem Komarov noted that when it comes to pipe welding, advanced waveform short-circuit transfer creates a
Комаров Артём о гидроабразивной резке следующего поколения (eng)
Komarov Artem noted that waterjet technology has managed to resolve challenges related to stream lag and taper in 2D cutting through the years with progressively
Комаров Артём управление станками для резки волоконным лазером (eng)
The Chairman of the Board of Directors of KERAMAX, Artem Komarov noted that if you had walked into a metal fabrication shop with a 6kW